|
|
Use of fluxing additives to modify the properties of asphalt binders
Šefránková, Radka ; Koudelka, Tomáš (referee) ; Dašek, Ondřej (advisor)
The subject of the thesis is to describe the effect of fluxing additives on the behaviour of asphalt binders. Emphasis will be placed on changes in rheological properties of asphalt binders at intermediate temperatures, stability during aging and influence of fluxing agents on their low-temperature properties. Theoretical part will deal with the principle of asphalt binders aging and it will summarize knowledge about fluxing additives. Further, empirical and functional tests will be described in order to evaluate asphalt binders. In the practical part, all laboratory tests will be evaluated and the effects of two different fluxing additives will be compared.
|
|
| |
|
|
Evaluation of properties of PMB containing binder from RAP
Měšťanová, Petra ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
Subject of this diploma thesis is to describe the effect of adding different amount of aged binder recovered from RAP on the change of properties of polymer modified bitumen. The RAP containing unmodified bitumen and the RAP where we can expect bitumen modification are used to recover binder. The binder obtained from RAP is dosed into the virgin binder in amount of 15 %, 30 % and 50 %. The methods of recycling of flexible pavements, extraction and regeneration of asphalt binders, rejuvenating of their properties and methods of empirical and functional laboratory tests are described in the theoretical part. The practical part deals with evaluating and comparison of the results mixed binders properties.
|
|
|
Influence of polymer modified bitumens storage on their properties
Měšťanová, Petra ; Fišer,, Jiří (referee) ; Dašek, Ondřej (advisor)
Subject of this bachelor’s thesis is to describe the influence of long-term storage of polymer modified bitumen at temperature of 180 °C on their properties. The principle of binder modification and test procedure of needle penetration, softening point, elastic recovery and dynamic viscosity in DSR will be explained in the theoretical part. The properties changes of five tested modified binders during storage will be evaluated and compared in the practical part.
|
|
|
Evaluation of Selected Properties of Asphalt Mixtures with High Air Void Content
Jakub, Tomáš ; Dašek, Ondřej (referee) ; Šperka, Pavel (advisor)
The bachelor thesis is focused on selected properties of asphalt mixtures with higher air-voids content. The first, theoretical part of the work deals with summary of the available literature. Especially in terms of the distribution of mixtures with higher air-voids content and basic effects of air-voids content behavior of the asphalt mixtures. The second, parctical part of the work deals with determinine properties of two asphalt mixtures, namely: porous asphalt (PA 8) and mastix asphalt with higher air-voids content (SMA NH 8). At first is described used test‘s methods and used materials. Within the work, some tests were modified in order to simulate the effect of frost and salt on asphalt mixtures. An integral part of the practical part is the determintation of water resistence (ITSR), frost and salt of the prepared mixture, their mutual comparison and comparison with existing regulations.
|
|
|
Influence of aging on selected properties of asphalt binders
Rimel, Jindřich ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor’s thesis, the properties of four asphalt binders with different degree of modification are compared. The influence of aging on their properties is examined. In the theoretical part, the types of aging, their impact on binders, basic laboratory methods of aging and the details of performed tests are explained. In the practical part, the results of tests are evaluated and the change of properties before and after aging are compared.
|
|
| |
|
|
Design of low-noise asphalt mixtures
Řehulka, Martin ; Koudelka, Tomáš (referee) ; Varaus, Michal (advisor)
The Master’s thesis is focused on low-noise asphalt mixtures in general, namely asphalt concrete for very thin layers with low noise (BBTM 8 NH) and stone mastic asphalt with low noise (SMA 8 NH). The first half of the thesis describes basic types of asphalt mixtures with low noise, requirements for raw materials (aggregates and asphalt), noise emissions and their measurement methods. The second part deals the design of BBTM 8 NH and SMA 8 NH so that they have the same voids. Subsequently, their parameters were tested. Acoustic absorption, resistence against permanent deformation and stiffness. Test methods are described and evaluated.
|
|
|
PmB - Polymer modified bitumens
Venclíková, Michaela ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor thesis, there are described modified bitumens. The issue of modified bitumens will be explained in the theoretical part. In the practical part, it will be prepared set of modified bituminous binders with different degree of modification. Basic empirical testing and functional testing will be determined. The aim of thesis is to find the optimal source of unmodified bitumen for modification.
|
|
|
Influence of aging on selected properties of asphalt binders
Rimel, Jindřich ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor’s thesis, the properties of four asphalt binders with different degree of modification are compared. The influence of aging on their properties is examined. In the theoretical part, the types of aging, their impact on binders, basic laboratory methods of aging and the details of performed tests are explained. In the practical part, the results of tests are evaluated and the change of properties before and after aging are compared.
|
guest ::
